Genesis Engine Repair in Abu Dhabi
Diagnosis first, then the repair the fault actually calls for.
- 4.5735 Reviews
- 20+Years Experience
- 1000+Happy Customers
- Free Pickup and Drop OffBy driver only, with service contract
- Free Car WashWith Service
- Dealership Alternative
- Service Contracts
- OEM Parts
- Up to 35% Off on Repairs
Free, no obligation
Request a Service Estimate
Send your Genesis model and year. An advisor confirms what the job involves and quotes it before anything is booked in.
- Certified technicians
- OEM-equivalent parts fitted as standard
- Free pickup and drop off (by driver only, with service contract)
Booking scheduled maintenance instead? Book a Minor Service Book a Major Service
What we do
Genesis Engine Repair in Abu Dhabi
An engine fault is diagnosed before it is quoted. Compression and leak-down figures, live data and a physical inspection decide whether the answer is a repair, a top-end job or a rebuild.
Read MoreShow Less
Fault Diagnosis
Stored and live data read with GDS, then checked against what the engine is physically doing.
Compression and Leak-Down Testing
The measurement that separates a worn cylinder from a leaking valve or a head gasket.
Timing System Inspection
Chains, tensioners and guides checked for stretch and wear before they let go.
Cooling System Repair
Thermostats, water pumps, radiators and hoses, which is where overheating usually starts.
Oil Leak Tracing
The leak found at its source rather than cleaned off and handed back.
Gasket and Seal Replacement
Head gaskets, covers and housings, resealed to the correct torque and sequence.
Turbocharger Work
Inspection, actuator testing and replacement where the turbo is the fault.
Injector and Fuel System
Testing, cleaning and replacement when the misfire is fuel rather than spark.
Top-End Overhaul
Head removal, valve work and reassembly where the wear is above the block.
Full Rebuild
Bearings, rings and machining, for an engine worth putting back rather than replacing.
Post-Repair Testing
Road test and a second scan, because a cleared code is not a completed repair.
What we see on these cars
Known Genesis Engine Faults We See
Modern turbocharged engines that are well built and expect to be serviced on schedule, which is where most of the trouble on a neglected one starts.
Turbocharger Oil Supply
The turbochargers are oil-cooled, so degraded oil damages them before it damages the engine. On a boosted engine that is the most expensive shortcut available.
Carbon on Direct Injection
No fuel wash over the intake valves, so carbon costs response and economy over time. Maintenance rather than repair.
Oil Consumption to Watch
Direct injection engines can use oil between services without leaking a drop, which is why level checks matter more here than on an older engine.
PCV and Crankcase Ventilation
A blocked system gives a rough idle and pushes oil past seals through pressure that has nowhere to go.
Cooling System Components
The water pump, thermostat and hoses heat-age. In this climate they behave as wear items.
Ignition Coils and Plugs
A misfire is very often ignition, and on a boosted engine worn plugs show up sooner than they would elsewhere.
How it works
How a Genesis Engine Repair Runs
Four stages, and you approve the cost before anything is dismantled.
1. Diagnosis
Codes, live data and a physical inspection, so the fault is identified rather than guessed.
2. Written Quote
What is wrong, what it takes to fix, and what it costs, before any work starts.
3. The Repair
Carried out to the manufacturer procedure, on OEM or OEM-equivalent parts.
4. Test and Handover
Road tested, rescanned and returned with the fault confirmed gone.
Why owners pick us
What You Get Back
A Diagnosed Fault
You are told what failed and why, not handed a list of replaced parts.
Correct Parts
OEM or OEM-equivalent, matched to your engine variant rather than the model name.
Proper Torque and Sequence
Engine work fails at reassembly as often as at diagnosis.
A Quote You Approved
Nothing is dismantled before you have agreed to the cost of it.
Tested Before Handover
Road test and a second scan, so the repair is confirmed rather than assumed.
Dealership Alternative
Main-dealer procedure and equipment without main-dealer pricing.
Every model
Genesis Models We Service
The same workshop, technicians and GDS equipment across the Genesis range.
- Compact sedans: G70 and G70 Shooting Brake
- Executive sedans: G80 and G90, running 2.5
- Mid-size SUVs: GV70 and GV80, built on the JK1
- Coupe SUV: GV80 Coupe, built on the JX1C
- Electrified models: GV60, Electrified GV70
- Other Genesis
Warning signs
When a Genesis Engine Needs Attention
None of these improves by being driven on. The earlier one is looked at, the smaller the job.
Knocking or Ticking
A metallic knock under load, or a tick that follows engine speed.
Blue or White Smoke
Oil or coolant reaching the combustion chamber.
Losing Coolant
No visible leak and the level still drops, which points inward.
Overheating
The gauge climbing in traffic, or after a long run.
Rough Idle or Misfire
Shaking at a standstill, or a stumble under acceleration.
Oil Consumption
Topping up between services on an engine that used not to need it.
Warning Light
A check engine light is a stored fault code waiting to be read.
Power Loss
The car feeling flat where it used to pull.
From the ramps
Our Recent Genesis Work
Genesis work from the Mussafah ramps, photographed on customer cars.
Engine bay access 
Engine work 
Brake and wheel service 
Underbody inspection
Every marque
Brands We Serve
The same workshop, technicians and equipment cover every marque below.
Before you book
Frequently Asked Questions
How Do You Diagnose a Genesis Engine Fault?
Stored and live data read with GDS, then compression and leak-down testing where the symptom calls for it. The scan narrows it; the measurement confirms it. A repair quoted off a code alone is a guess.
Repair, Overhaul or Replace?
It depends on where the wear is. A leaking gasket or a failed tensioner is a repair. Wear above the block is a top-end job. Bearing or bore wear is a rebuild, and on some engines a good used unit is the better value. We will tell you which, with the figures behind it.
Do You Use Genuine Genesis Parts?
OEM or OEM-equivalent parts, chosen for the engine variant rather than the model name. Where a genuine part is the only sensible option we say so.
How Long Does Engine Work Take?
Diagnosis is usually the same visit. A repair depends on what it is and on parts availability, and you get a time with the quote rather than after it.
Will a Cleared Warning Light Mean It Is Fixed?
No. Clearing a code only removes the message. The car is rescanned after a road test, so the fault is confirmed gone rather than merely silent.
The Car Is Using Oil but There Is No Leak
Modern direct injection engines can consume a measurable amount between services through the crankcase ventilation system rather than through a leak. Some of that is normal and some is not, and the difference is established by measuring it over a known distance rather than by opinion.
Book Your Genesis Engine Repair Today
Send your Genesis model and year and an advisor will confirm what the job involves and what it costs, before anything is booked in.
- Musaffah M21, Abu Dhabi
- Mon to Sat 9am to 10pm, Sun 9am to 7pm
- +971 58 609 5249
Terms and Conditions: Free pickup and drop off is by driver only and applies with an active Service Contract.