Expert Infiniti Repair & Service Workshop in Abu Dhabi

Infiniti Engine Repair

Infiniti engine repair covers timing chain replacement, valve cover gasket leaks, ignition coil failure, and high-pressure fuel pump faults. The VR30DDTT, VQ37VHR, and VK56VD units all come through the workshop.

Heat soak in Mussafah traffic hardens VQ37VHR valve cover gaskets ahead of schedule. Technicians inspect the rear bank gasket at every 40,000 km service.

Infiniti VC-Turbo Variable Compression Service

The KR20DDET VC-Turbo shifts compression between 8:1 and 14:1 through a multi-link actuator. Service work covers that actuator, its harmonic drive motor, and the dedicated oil feed.

Oil film strength drops once ambient temperature passes 45°C. A 5,000 km oil interval protects the multi-link bearings on QX50 and QX55 cars driven through Abu Dhabi summers.

Infiniti Transmission Repair

Infiniti transmission repair addresses valve body faults, solenoid failure, and torque converter shudder. Technicians strip and rebuild the 7-speed RE7R01A automatic and the current QX60 nine-speed unit.

Stop-start traffic on Mussafah service roads pushes transmission fluid past 110°C. An auxiliary cooler inspection forms part of every transmission service.

Infiniti Xtronic CVT Service

Xtronic CVT service replaces Nissan NS-3 fluid, inspects the steel push belt, and measures pulley face scoring. QX50, QX55, and earlier QX60 models run this gearbox.

CVT fluid oxidises faster at 48°C than in temperate climates. A 60,000 km fluid interval preserves the pulley surfaces on Abu Dhabi cars.

Infiniti Suspension Repair

Control arm bushings, ball joints, dampers, and Dynamic Digital Suspension actuators make up standard suspension work on Q50 and Q60 models.

Sand ingress cracks bushing rubber faster on vehicles parked outdoors in Mussafah. Technicians inspect the front lower arms every 20,000 km.

Infiniti Hydraulic Body Motion Control Service

Hydraulic Body Motion Control links the QX80 front and rear dampers through hydraulic lines instead of anti-roll bars. Service work covers accumulator pressure, line leaks, and fluid condition.

Under-body temperature past 50°C thins the hydraulic fluid and masks early accumulator wear. Pressure testing after long desert runs identifies that wear before body roll changes.

Infiniti Brake Pad Replacement

Brake pad replacement matches the pad compound to the caliper: Akebono four-piston front units on Red Sport 400 cars, and sliding calipers on QX60 and QX80.

Airborne dust glazes pad surfaces during Abu Dhabi highway driving. Rotor runout measurement accompanies every pad change.

Infiniti Body Work

Coastal humidity across Abu Dhabi island accelerates corrosion at repaired seams. Cavity wax reapplication follows every panel replacement.

Infiniti Paint Services

Single-panel refinishing matches the original factory colour code, such as Liquid Platinum K23, Black Obsidian KH3, or Majestic White QAB.

UV exposure at Abu Dhabi latitude breaks down clear coat on horizontal surfaces first. Roof and bonnet panels receive an additional clear layer.

Infiniti Dent Repair

Paintless dent removal reshapes panels from behind and keeps the factory clear coat intact across door skins, bonnets, and quarter panels.

Shopping centre car parks produce the door-edge dent pattern seen on Mussafah-driven cars. Panels with cracked paint move to filler and refinish work instead.

Infiniti AC Repair

Infiniti AC repair covers compressor replacement, condenser leaks, expansion valve blockage, and evaporator service on R-134a and R-1234yf systems.

Fine industrial dust clogs condenser fins across Mussafah. A pressure wash of the condenser face forms part of every AC service.

Infiniti CONSULT-III Plus Diagnostics

CONSULT-III Plus reads fault codes, live data, and control unit configuration across every onboard ECU, from the engine controller to the ProPILOT Assist radar.

Heat-related faults clear themselves before a car reaches the workshop. Recorded freeze-frame data captures the exact fault condition for review.

Infiniti Cooling System Service

Cooling system service replaces coolant, tests the electric water pump, and pressure-checks the radiator and charge-air cooler circuit.

Ambient temperature above 45°C leaves almost no thermal margin. A weak fan or blocked radiator core shows up as coolant temperature climbing in traffic.

Infiniti Electrical and Battery Service

Infiniti electrical work covers battery replacement, alternator output testing, parasitic drain tracing, and InTouch dual-screen infotainment faults.

Sustained under-bonnet heat shortens AGM battery service life in Gulf conditions. Load testing at every service catches capacity loss before a no-start.

Infiniti Wheel Alignment and Direct Adaptive Steering Calibration

Infiniti wheel alignment sets camber, caster, and toe on a Hunter rig. Direct Adaptive Steering calibration follows on Q50 and Q60 cars fitted with the steer-by-wire system.

Kerb strikes on Mussafah industrial roads knock front toe out of specification. A steering angle sensor reset closes out every alignment on DAS-equipped cars.