Lamborghini Brake Pad and Disc Replacement in Abu Dhabi
Measured before quoting, replaced in axle sets, bedded in after.
- 4.5735 Reviews
- 20+Years Experience
- 1000+Happy Customers
- Free Pickup and Drop OffBy driver only, with service contract
- Free Car WashWith Service
- Dealership Alternative
- Service Contracts
- OEM Parts
- Up to 35% Off on Repairs
Free, no obligation
Request a Service Estimate
Send your Lamborghini model and year. An advisor confirms what the job involves and quotes it before anything is booked in.
- Certified technicians
- OEM-equivalent parts fitted as standard
- Free pickup and drop off (by driver only, with service contract)
Booking scheduled maintenance instead? Book a Minor Service Book a Major Service
What we do
Lamborghini Brake Pad and Disc Replacement
Brakes are measured, not estimated. Pad thickness and disc thickness against the manufacturer minimum decide what needs replacing, and you see the figures before you agree to anything.
Read MoreShow Less
Brake Inspection and Measurement
Pad and disc thickness measured against the wear limit, and the figures shared.
Brake Pad Replacement
Replaced in axle sets, on pads matched to the car rather than the cheapest that fit.
Brake Disc Replacement
Replaced when below minimum thickness or unevenly worn.
Caliper Service and Repair
Sliders cleaned and seals checked, which is what stops uneven wear returning.
Brake Fluid Replacement
Fluid absorbs moisture and loses its boiling point, and heat here accelerates it.
Wear Sensor Replacement
Replaced with the pads, since a used sensor gives a false reading.
Electronic Parking Brake Service
Retracted and reset with ODIS, which an EPB requires rather than prefers.
ABS Diagnosis
Warning lights and sensor faults read rather than cleared.
Brake Hose and Line Inspection
Perishing and corrosion found before they become a failure.
Bedding-In and Road Test
Bedded to the correct procedure, because new brakes are not at full performance cold.
What we see on these cars
What Matters on Lamborghini Brakes
Carbon ceramic brakes on most of these cars, which changes everything about how they are inspected and quoted.
Carbon Ceramic Discs
Most of these cars carry ceramic discs, which take specific pads and cost several times a steel setup. Confirmed before ordering, never assumed.
Ceramic Disc Wear
Ceramic discs wear by mass loss rather than thickness alone, so they are assessed to the manufacturer method rather than measured like steel.
Pad Material
Ceramic systems require pads made for them. Fitting the wrong material damages a very expensive disc.
Brake Fluid Condition
On a car with this performance, boiling point matters, and heat here degrades fluid faster than the schedule assumes.
Caliper Service
Seals and pistons checked, which on a car that is stored between drives is worth doing rather than assuming.
Bedding-In
Done to the correct procedure, because vibration on a car like this is unacceptable.
How it works
How Lamborghini Brake Work Runs
Four stages, and you see the measurements before you approve anything.
1. Measure
Pad and disc thickness against the manufacturer minimum, on all four corners.
2. Written Quote
The figures, what they mean, and what the work costs.
3. Replacement
In axle sets, with sliders cleaned and hardware replaced.
4. Bed In and Road Test
Bedded to procedure and tested, so the brakes work as intended from the first stop.
Why owners pick us
What You Get Back
Stopping Distance
The measurement that matters, restored.
A Quiet, Even Pedal
No squeal, no vibration, no pulling.
Measured, Not Guessed
You see the pad and disc figures before agreeing to the work.
Correct Pads
Matched to the car and how it is driven, not to the price list.
EPB Handled Properly
Retracted and reset with the diagnostic tool, which an EPB requires.
Bedded In
New brakes tested and bedded before the car goes back.
Every model
Lamborghini Models We Service
The same workshop, technicians and ODIS equipment across the Lamborghini range.
- Revuelto or Fenomeno
- Temerario
- Huracan, EVO, Tecnica or STO
- Aventador, S, SVJ or Ultimae
- Urus, S, Performante or SE
- Gallardo or Murcielago
- Other Lamborghini
Warning signs
When a Lamborghini Needs Brake Work
Braking is the one system with no margin for waiting. Eight signs to act on.
Squealing
A wear indicator doing its job, or glazed pads.
Grinding
Metal on metal. This is past the pad and into the disc.
Vibration Under Braking
Uneven disc thickness felt through the pedal or the wheel.
Longer Stopping Distance
The most important sign and the easiest to normalise.
Soft or Sinking Pedal
Fluid, air or a hydraulic fault, and none of them wait.
Pulling to One Side
A seized caliper or a hydraulic problem on one corner.
Brake Warning Light
Fluid level, pad wear or ABS, and worth reading rather than guessing.
Parking Brake Fault
An electronic parking brake reporting a fault needs diagnosis, not force.
From the ramps
Our Recent Lamborghini Work
Lamborghini work from the Mussafah ramps, photographed on customer cars.
Aventador in the bay 
On the ramp 
Engine bay detail 
Doors up in the workshop
Every marque
Brands We Serve
The same workshop, technicians and equipment cover every marque below.
Before you book
Frequently Asked Questions
Do Discs Have to Be Replaced With Pads?
Not always. Discs are replaced when they are below minimum thickness, unevenly worn or scored. If they measure within specification they stay, and we show you the figures either way.
How Long Do Brakes Last Here?
Less than in cooler traffic. Heat and stop-start driving both shorten pad life, and a heavy car shortens it further. Measurement is the only reliable answer for your car.
How Often Should Brake Fluid Be Changed?
Every two years is the usual guidance and it is sound here. Fluid absorbs moisture, moisture lowers the boiling point, and a low boiling point is what gives you a soft pedal after repeated heavy braking.
Why Does an Electronic Parking Brake Need a Tool?
The caliper piston is driven by a motor and has to be retracted electronically. Forcing it back damages the mechanism, which is why an EPB is put into service mode with ODIS and reset afterwards.
What Is Bedding In?
A controlled sequence of stops that transfers an even layer of pad material onto the disc. Skip it and you get vibration and reduced performance from brakes that are otherwise perfectly good.
How Is Carbon Ceramic Disc Wear Measured?
Not the way steel is. Ceramic discs lose mass rather than simply thinning, so they are assessed by the manufacturer method. Judging one by thickness alone gives an answer that is confidently wrong, on a component that costs a great deal to replace unnecessarily.
Book Your Lamborghini Brake Pad & Disc Today
Send your Lamborghini model and year and an advisor will confirm what the job involves and what it costs, before anything is booked in.
- Musaffah M21, Abu Dhabi
- Mon to Sat 9am to 10pm, Sun 9am to 7pm
- +971 58 609 5249
Terms and Conditions: Free pickup and drop off is by driver only and applies with an active Service Contract.