Mitsubishi Engine Repair in Abu Dhabi
Diagnosis first, then the repair the fault actually calls for.
- 4.5746 Reviews
- 10+Years Experience
- 1000+Happy Customers
- Free Pickup and Drop OffBy driver only, with service contract
- Free Car WashWith Service
- Dealership Alternative
- Service Contracts
- OEM Parts
- Up to 35% Off on Repairs
No obligation
Request a Service Estimate
Send your Mitsubishi model and year. An advisor confirms what the job involves and quotes it before anything is booked in.
- Certified technicians
- OEM-equivalent parts fitted as standard
- Free pickup and drop off (by driver only, with service contract)
Booking scheduled maintenance instead? Book a Minor Service Book a Major Service
What we do
Mitsubishi Engine Repair in Abu Dhabi
An engine fault is diagnosed before it is quoted. Compression and leak-down figures, live data and a physical inspection decide whether the answer is a repair, a top-end job or a rebuild.
Read MoreShow Less
Fault Diagnosis
Stored and live data read with MUT-III, then checked against what the engine is physically doing.
Compression and Leak-Down Testing
The measurement that separates a worn cylinder from a leaking valve or a head gasket.
Timing System Inspection
Chains, tensioners and guides checked for stretch and wear before they let go.
Cooling System Repair
Thermostats, water pumps, radiators and hoses, which is where overheating usually starts.
Oil Leak Tracing
The leak found at its source rather than cleaned off and handed back.
Gasket and Seal Replacement
Head gaskets, covers and housings, resealed to the correct torque and sequence.
Turbocharger Work
Inspection, actuator testing and replacement where the turbo is the fault.
Injector and Fuel System
Testing, cleaning and replacement when the misfire is fuel rather than spark.
Top-End Overhaul
Head removal, valve work and reassembly where the wear is above the block.
Full Rebuild
Bearings, rings and machining, for an engine worth putting back rather than replacing.
Post-Repair Testing
Road test and a second scan, because a cleared code is not a completed repair.
What we see on these cars
Known Mitsubishi Engine Faults We See
Tough engines built for hard use, and most of what arrives is heat, cooling and the consequences of a stretched service interval.
Cooling Under Load
These vehicles work hard in high ambient temperatures, and radiators, thermostats and water pumps are wear items rather than lifetime parts here.
Timing Belt Where Fitted
Some of these engines use a belt rather than a chain, and it is a hard interval rather than an advisory one. A belt that fails takes the engine with it.
Diesel Intake and EGR Carbon
On the diesels the intake and EGR carbon up, giving lost power and a limp mode that reads as something worse.
Turbocharger Oil Supply
On the turbocharged engines the turbo is oil-cooled, so degraded oil damages it before it damages anything else.
Ignition Coils and Plugs
A misfire is very often ignition, and it is quick and cheap to rule in or out first.
Oil Leaks From Covers
Cam covers and housings weep with age and heat, giving an oil smell before anything reaches the floor.
How it works
How a Mitsubishi Engine Repair Runs
Four stages, and you approve the cost before anything is dismantled.
1. Diagnosis
Codes, live data and a physical inspection, so the fault is identified rather than guessed.
2. Written Quote
What is wrong, what it takes to fix, and what it costs, before any work starts.
3. The Repair
Carried out to the manufacturer procedure, on OEM or OEM-equivalent parts.
4. Test and Handover
Road tested, rescanned and returned with the fault confirmed gone.
Why owners pick us
What You Get Back
A Diagnosed Fault
You are told what failed and why, not handed a list of replaced parts.
Correct Parts
OEM or OEM-equivalent, matched to your engine variant rather than the model name.
Proper Torque and Sequence
Engine work fails at reassembly as often as at diagnosis.
A Quote You Approved
Nothing is dismantled before you have agreed to the cost of it.
Tested Before Handover
Road test and a second scan, so the repair is confirmed rather than assumed.
Dealership Alternative
Main-dealer procedure and equipment without main-dealer pricing.
Every model
Mitsubishi Models We Service
The same workshop, technicians and MUT-III equipment across the Mitsubishi range.
- Pajero and Pajero GLS
- Montero Sport and Pajero Sport
- Outlander and Outlander PHEV
- ASX
- Eclipse Cross
- Xpander and Xpander Cross
- L200 and L200 Sportero
- Attrage and Mirage
- Other Mitsubishi
Warning signs
When a Mitsubishi Engine Needs Attention
None of these improves by being driven on. The earlier one is looked at, the smaller the job.
Knocking or Ticking
A metallic knock under load, or a tick that follows engine speed.
Blue or White Smoke
Oil or coolant reaching the combustion chamber.
Losing Coolant
No visible leak and the level still drops, which points inward.
Overheating
The gauge climbing in traffic, or after a long run.
Rough Idle or Misfire
Shaking at a standstill, or a stumble under acceleration.
Oil Consumption
Topping up between services on an engine that used not to need it.
Warning Light
A check engine light is a stored fault code waiting to be read.
Power Loss
The car feeling flat where it used to pull.
From the ramps
Our Recent Mitsubishi Work
Mitsubishi work from the Mussafah ramps, photographed on customer cars.
On the two-post lift 
Engine bay inspection 
Brake and wheel service
Every marque
Brands We Serve
The same workshop, technicians and equipment cover every marque below.
Before you book
Frequently Asked Questions
How Do You Diagnose a Mitsubishi Engine Fault?
Stored and live data read with MUT-III, then compression and leak-down testing where the symptom calls for it. The scan narrows it; the measurement confirms it. A repair quoted off a code alone is a guess.
Repair, Overhaul or Replace?
It depends on where the wear is. A leaking gasket or a failed tensioner is a repair. Wear above the block is a top-end job. Bearing or bore wear is a rebuild, and on some engines a good used unit is the better value. We will tell you which, with the figures behind it.
Do You Use Genuine Mitsubishi Parts?
OEM or OEM-equivalent parts, chosen for the engine variant rather than the model name. Where a genuine part is the only sensible option we say so.
How Long Does Engine Work Take?
Diagnosis is usually the same visit. A repair depends on what it is and on parts availability, and you get a time with the quote rather than after it.
Will a Cleared Warning Light Mean It Is Fixed?
No. Clearing a code only removes the message. The car is rescanned after a road test, so the fault is confirmed gone rather than merely silent.
Does My Engine Have a Timing Belt or a Chain?
It depends on the engine, and the difference matters a great deal. A belt is a scheduled replacement and failing to do it destroys the engine, whereas a chain is inspected rather than replaced to a calendar. We confirm which is fitted rather than assuming from the model.
Book Your Mitsubishi Engine Repair Today
Send your Mitsubishi model and year and an advisor will confirm what the job involves and what it costs, before anything is booked in.
- Musaffah M21, Abu Dhabi
- Mon to Sat 9am to 10pm, Sun 9am to 7pm
- +971 58 609 5249
Terms and Conditions: Free pickup and drop off is by driver only and applies with an active Service Contract.